Free Essay

Expe 1

In: Other Topics

Submitted By gumbanityis
Words 597
Pages 3
Sound Intensity and Sleep Deprivation: A two-sample examination of reaction time in an uncontrolled environment Shane Afsar CU Boulder, Fall 2006 Do sound intensities and the amount of sleep an individual obtained affect his or her reaction time? Studies released to the media often report that sleep deprivation adversely affects reaction time – a fact most recognized in the numerous reports which state that driving in a sluggish state decreases an individual’s ability to respond to stimuli. Therefore, we hypothesized that sleep deprivation negatively affects an individual’s ability to respond to sound, regardless of the sound’s intensity.
Using a reaction timer, we assigned four individuals as an experimental control that reported seven to nine hours of sleep and tested them at low, medium, and high sound intensities to see if the intensity of the sound does indeed have a significant effect on reaction time. Then, we tested the reaction time of four sleep deprived individuals who reported five hours of sleep at each of the sound intensities. We randomly selected a sound intensity during each trial to attempt to minimize the effects of anticipation. If sleep deprivation harmfully influences an individual’s capability to react to sound (regardless of intensity), then sleep deprived individuals will react more slowly to low, medium, and high intensity sounds compared to well-rested individuals.
The mean reaction times to the sound intensities in the experimental control are 0.706, 0.622, and 0.453 seconds for the low, medium, and high sound intensities, respectively. The mean reaction times for the well-rested group are 0.662, 0.575, and 0.504 seconds. A T-test revealed that there is significance between the low sound intensity reaction time and the high sound intensity reaction time for the experimental control (P-value 0.05). Another test revealed that there is no significance between the low sound intensity reaction time and the high sound intensity reaction time for the sleep deprived group (P-value 0.17).
Reasonably consistent with the predictions based on our hypothesis, the results show that sound intensity is insignificant in relation to the reaction time of sleep deprived individuals. Although the mean reaction times show that the sleep deprived individuals reacted just as well as the experimental control, a brief analysis of our methods shows that there is room for improvement in testing our hypothesis – including the small number of individuals we tested and the uncontrolled environment (i.e. the loud classroom) surrounding the tested individuals.
An experiment on reaction time and music, “Reaction Times of Students: The effect of music volume on reaction time” could not make any solid conclusions due to the inconsistency of their results (Dowling et al. 2005). Another similar study concluded that music did not have an adverse effect on one’s ability to react (Blansit et al. 2005).
Results with the initial run of our experiment indicate that not only does sleep deprivation negatively affect an individual’s ability to respond to any type of sound, but also that sound intensity is a factor affecting response time for well-rested individuals. Based on the variability of the results from previous experiments, this experiment should be repeated to further test the hypothesis. An alternative hypothesis should also be tested to further note the effects of sound intensity in well-rested individuals. However, it is sensible to conclude that a severely sleep deprived individual cannot successfully respond to stimuli of any magnitude, and that the individual should rest before participating in any potentially fatal activities – such as driving. http://www.colorado.edu/eeb/courses/1230jbasey/abstracts%202006/30.htm…...

Similar Documents

Premium Essay

Unit 1 Assignment 1

...Unit 1 Assignment 1 1. Describe the role of software for computers: Computer software tells the hardware what to do. Without any software, the hardware would be worthless. Think of the software as a subject in school, and the hardware as you or your brain. Without any learning, you can't do anything. One you have learned some math, and then you are able to solve math problems. This learning is usually accomplished through downloads or CD's that are loaded into the computer. At the very basic level, computer software contains specific instructions for how to accomplish a specific task. These instructions tell the hardware exactly what to do, and how to do it 2. Identify the hardware associate with a computer: the physical components that make up a computer system. There are many different kinds of hardware that can be installed inside, and connected to the outside, of a computer. Here are some common individual computer hardware components that you'll often find inside a modern computer case: Motherboard, Central Processing Unit (CPU), Random Access Memory (RAM), Power Supply Video Card, Hard Drive (HDD), Solid-State Drive (SSD), Optical Drive (e.g. BD/DVD/CD drive) Card Reader (SD/SDHC, CF), etc. Here is some common hardware that you might find connected to the outside of a computer: Monitor, Keyboard, and Mouse 3. Describe how computer store data: it converts the request into binary digits and its stores the data in a database. As a table format. The binary data can......

Words: 324 - Pages: 2

Premium Essay

Case 1-1

...as goodwill. Long-term debt and other obligations of an acquired company should be valued for consolidation purposes at their fair value. On January 1, 2010, Lester Company purchased 70% of Stork Corporation's $5 par common stock for $600,000. The book value of Stork net assets was $640,000 at that time. The fair value of Stork's identifiable net assets were the same as their book value except for equipment that was $40,000 in excess of the book value. In the January 1, 2010, consolidated balance sheet, goodwill would be reported at $177,143. When the value implied by the purchase price of a subsidiary is in excess of the fair value of identifiable net assets, the workpaper entry to allocate the difference between implied and book value includes a 1. debit to Difference Between Implied and Book Value. 2. credit to Excess of Implied over Fair Value. 3. credit to Difference Between Implied and Book Value. c. 3 If the fair value of the subsidiary's identifiable net assets exceeds both the book value and the value implied by the purchase price, the workpaper entry to eliminate the investment account debits Difference Between Implied and Book Value. The entry to amortize the amount of difference between implied and book value allocated to an unspecified intangible is recorded 1. on the subsidiary's books. 2. on the parent's books. 3. on the consolidated statements workpaper. c. 3 The excess......

Words: 4751 - Pages: 20

Premium Essay

Wk 1 Dis 1

...“marginal” means “extra,” “additional,” or “a change in.” Most choices or decisions involve changes in the status quo, meaning the existing state of affairs. For instance, should you attend school for another year? Should you study an extra hour for an exam? Should you supersize your fries? Similarly, should a business expand or reduce its output? Should government increase or decrease its funding for a missile defense system (Brue & McConnell, 2010)? Each option involves marginal benefits and, be- cause of scarce resources, marginal costs. In making choices rationally, the decision maker must compare those two amounts. Example: You and your fiancée are shopping for an engagement ring. Should you buy a 1/2-carat diamond, a 5/8-carat diamond, a 3/4-carat diamond, a 1-carat diamond, or something even larger? The marginal cost of a larger-size diamond is the added expense beyond the cost of the smaller-size diamond. The marginal benefit is the perceived greater lifetime pleasure (utility) from the larger-size stone. If the marginal benefit of the larger diamond exceeds its marginal cost (and you can afford it), buy the larger stone. But if the marginal cost is more than the marginal benefit, buy the smaller diamond instead, even if you can afford the larger stone (Brue & McConnell, 2010)! I myself have been making decisions in which I have weighed marginal cost and marginal benefits during the holiday season. For example, for Christmas I was buying my daughter a......

Words: 597 - Pages: 3

Premium Essay

Egt 1 Task 1

...EGT 1 Task 1 A. 1. The profit maximization approach used when total revenue and total cost are compared is the largest positive gap or profit gained between total revenue less total cost. In the table provided the largest profit or profit maximization would be $540. When you produce 8 items profit is at its highest point. To calculate total revenue you take the price times the quantity and to calculate total cost you take the sum of variable and fixed costs. 2. The profit maximization approach used when marginal revenue and marginal cost are compared is to take the marginal revenue less the marginal cost. In this process you look at how each additional unit affects total revenue and total cost. Marginal revenue is equal to the change of total revenue divided by change in quantity and Marginal cost is equal to the change in total cost divided by change in quantity. Once marginal cost exceeds marginal revenue it is not effective to produce the product and there is no longer a profit maximization. The profit maximization approach when using marginal revenue and marginal cost is to make as many products as you can until marginal cost equals marginal revenue. B. 1. Marginal revenue it the change in total revenue divided by the change in quantity. To get total revenue so that you can calculate marginal revenue you need to take the price times quantity less total cost. Marginal revenue becomes elastic and stays constant when there is perfect competition. But marginal revenue usually...

Words: 883 - Pages: 4

Premium Essay

Edp 1 Task 1

...Running Head: Children's Literature Task 1 1 Children;s Literature Task 1 Arthur Carroll Western Governor's University Children's Literature Task 1 2 Children's Literature Task 1 It is well known that the world is filled to the brim with a rich history in athletics, education, science, politics, and the arts. What is not common knowledge is the history and richness of children's literature and how it eventually became what it is today. Just like most things, what we now know as children's literature is nothing like what it was originally, it has transformed into something else entirely. Nonetheless, it has as colorful a history as it does some of it's own books. Before children's literature was ever even written down it was given to children in a less tangible way; orally. Prior to publishers like Scholastic and Golden Books existence, the technology to write books was long and tedious, especially if the author was trying to make many copies. So instead, children's literature was told out loud where many could hear it at once and the time factor for preparation was at a minimum. Once authors had better technology to help simplify the process of physical writing, oral literature transformed into written literature. It wasn't always computers or even typewriters though, written used to literally mean written. Like the transformation from mouth to pen, pen evolved to......

Words: 882 - Pages: 4

Premium Essay

Horizon 1-2-3

...Ins sights f from T Cla The arion In nstitut te Hori izon 1-2 2-3: A More C Compl lete Vie ew By B Jon Wheeler, Roy Maurer, a and the Par rtners of T The Clarion Group n Geoffrey Mo G oore, author of the boo Crossing r ok g the Chasm, recently wrote an article in the t w e Harvard Bu H usiness Review about a growth t h portfolio fra p amework cal lled Horizon 1-2-3 (H1n 2-3). The fra 2 amework, originally de o eveloped by y Mehrdad Ba M aghai, Step phen Coley, and David d White, esta W ablished a view that companies s that are su t uccessful in the long term have n e growth initi g iatives in th hree stages: Horizon 1, : , the mature slow growt businesses; Horizon t th n 2, 2 the emerging high growth businesses; and g d Horizon 3, t embryon ideas an pilots ofH the nic nd ten found in R&D. Moore asserts in the art n s ticle that h has obs t he served a t tendency of f companies, particularl technolo c ly ogy companies, to ta n ake promising H3 pr rojects and d launch them directly in H1 whe they ofl m nto ere ten are un t nsuccessful under the weight of f near-term fi n inancial pre essures and the need to o conform to the curren business model and c nt d organization norms. The Clarion Group has o nal T n s used the H u H1-2-3 framework with dozens of h f clients over the years, and we hav seen the c ve e phenomenon Moore describes o p n d occasionally. . However, using the H1-2-3 framework as a H H diagnostic, we have also seen ot d a ther trends s more freque m ently –......

Words: 2827 - Pages: 12

Premium Essay

Unit 1 Assignment 1

...Homework Unit 1 Assignment 1 1. Why is the CPU the most important component in a computer? It’s the part of the computer that runs programs. 2. What number does a bit that is turned on represent? What number does a bit that is turned off represent? A turned on bit is 1 and a turned off bit is 0. 3. What would you call a device that works with binary data? A digital device 4. What are the words that make up a high-level programming language called? Key words or reserved words 5. What are the short words that are used in assembly language called? Mnemonics 6. What is the difference between a compiler and an interpreter? A compiler translates a high-lever program into a separate machine language program; whereas, an interpreter is a program that both translates AND executes instructions in a high-level program language program. 7. What type of software controls the internal operations of the computer’s hardware? Operating systems which is a type of system software. Unit 2 Assignment 1 Short Answer 1. What does a professional programmer usually do first to gain an understanding of a problem? Works with and interviews the customer to gain an understanding of what the customer wants the program to accomplish. 2. What is a pseudocode? A “fake” code that programmers use to test their programs before executing them. 3. Computer programs typically perform what three steps? A) Input is received B) Some process......

Words: 508 - Pages: 3

Free Essay

Unit 1 Assignment 1

...Unit 1 Assignment 1 Integrated Circuit Technology A motherboard is the backbone of the personal computer, it transfers information and power to all the other components. The motherboard is the largest board inside of the computer that contains the basic input and output system that allows every component to communicate with one another. Attached to the motherboard is a chip comprised with dozens of pins called the central processing unit. Along with the CPU attached to the motherboard is the dual-inline memory modules a part of the random access memory. RAM is the most common type of memory used another type is ROM, read only memory, which stores data onto metal disc within the device. The operating system manages the hardware resources and provides a place to run programs. The last components of the personal computer are the tower and the human interface devices. The tower holds all the components that make up the computer except for the HID which are located outside of the computers tower. The main purpose of the HID’s are to help us interact with the computer, a few examples are the keyboard, mouse, monitor, video camera and speakers. You put together the Motherboard, CPU, RAM, ROM, OS, Tower, HID’s add a power supply and you have a basic personal computer. PROCESSOR TRANSISTOR YEAR Intel 4004 | 2,300 | 1971 | Intel 8008 | 3,500 | 1972 | Intel 8080 | 4,500 | 1974 | Intel 8085 | 6,500 | 1976 | ......

Words: 427 - Pages: 2

Premium Essay

Unit 1 Assignment 1

...Section 1-1 1. Define modulation. In electronics and telecommunications, modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal, with a modulating signal that typically contains information to be transmitted. *2. What is carrier frequency? The frequency generated by an unmodulated radio, radar, carrier communication, or other transmitter, or the average frequency of the emitted wave when modulated by a symmetrical signal. Also known as center frequency; resting frequency. 3. Describe the two reasons that modulation is used for communications trans- missions. 1) Signal integrity 2) Power savings 4. List the three parameters of a high-frequency carrier that may be varied by a low-frequency intelligence signal. 1) Amplitude 2) frequency 3) phase of of a carrier may be varied by an intelligent signal. 5. What are the frequency ranges included in the following frequency subdivi- sions: MF (medium frequency), HF (high frequency), VHF (very high fre- quency), UHF (ultra high frequency), and SHF (super high frequency)? Very low frequency (10 to 30 kilocycles) VLF. Low frequency (30 to 300 kilocycles) LF. Medium frequency (300 to 3000 kilocycles) MF. High frequency (3,000 to 30,000 kilocycles) HF. Very high frequency (30,000 to 300,000 kilocycles) VHF. Ultra high frequency (300,000 to 3,000,000 kilocycles )UHF. Super high frequency (3,000,000 to 30,000,000 kilocycles) SHF. Section 1-2 7. A......

Words: 982 - Pages: 4

Premium Essay

Assingment 1 Unit 1

...1. Explain the difference between operating system software, application software, and utility software. The difference between the 3 programs is that the operating system is the central control for all programs on a computer. The utility software is what keeps the operating system and application working normal without clutter or virus. Then the application software is what issued in the operating system to interact with the hardware to make the computer my user friendly. 2. Explain the concept of virtual memory and why it is needed. Virtual memory is the use of hard drive space for program data that is currently not in use. So that the program that does need the ram memory can use it without being hinder. 3. What would be a possible cause of disk “thrashing”? Disk thrashing could be possible if you have to mean application open at once. Which could over run your ram and your virtual memory? This could cause considerable damage to the hard drive do to the transferred data back and forth over it. 4. How is the Windows registry organized? Keys and sub keys 5. How would you change mouse parameters like double-click speed? To change the parameters you would first go to the start button on bottom left of your screen. From there find the control panel and click it. The go to the hardware and sound button were you will find the mouse button. Once you’re in mouse properties under the buttons tab you will see the double-click speed option to change it. 6. Why...

Words: 501 - Pages: 3

Premium Essay

Etg 1 Task 1

...unit of output is produced and sold, MR is the derivate of total revenue taken with respect to quantity. This the formula is used to determine the marginal revenue. ΔTR/ ΔQ Now I will show how marginal revenue increases, decreases, or remains constant in the given scenario. MR decreases as the quantity increase. Applying the ΔTR/ ΔQ equation shows that as more units are produced the firm earns $10.00 on each additional unit of output. For example, a company producing widgets has a total revenue of $0, when it doesn't produce any output. The revenue it sees from producing its first widget is $150, bringing marginal revenue to $150 ($150 in total revenue/1 unit of product). If the revenue from the second widget is $290, the marginal revenue gained by producing the second widget is $10 (change in total revenue: $290-$150/1 = $140 from $150 = $10 for each additional unit). Now I will explain the calculation used to determine marginal cost. Marginal cost is (MC) = ΔTC /ΔQ or Where Δ= Change, TC= Total Cost, Q= Quantity Discuss how marginal cost increases, decreases, or remains constant in the given scenario. MC appears to decrease then stabilize after the first widget is sold. The price decreases from the first unit of output from $20.00 and becomes stable with each addition output unit. Explain where profit-maximization occurs for Company A using the chart provided in the given scenario. In this scenario, profit maximization occurs when 8 widgets of output are......

Words: 586 - Pages: 3

Premium Essay

Unit 1 Assignment 1

...Daphne Jones AP2530 Unit 1 Assignment 1: Homeostatic Imbalances Hypertension is caused by physical inactivity, a salt-rich diet made by processed and fatty foods, and also alcohol and tobacco use. You can identify hypertension if your blood pressure is higher than 140 over 90 mmHg. While having hypertension you could also develop some other conditions such as kidney disease. Even though hypertension itself does not cause symptoms, it does lead into long-term complications caused by blood vessels becoming narrower. To be able to reduce Hypertension and get better, we would need to cut down, restrictions such as salt restriction; moderation of alcohol and other diet changes that have affect your condition you have now. There are several drugs that may be used for treatment. Hypertension will affect your heart, so your blood pressure should be normal… when you follow the restrictions. Diabetes Is also called diabetes mellitus, what it does is describes a group of metabolic diseases in where you have high blood glucose, which is high blood sugar. You will experience frequent urination called polyuria, and become more thirsty and hungry. There are two types of diabetes, Type 1 and Type 2. With type 1, your body doesn’t make enough insulin, which is a hormone. Type 2 is where your body doesn’t produce enough of the insulin to function properly. There is Gestational Diabetes, but fortunately for you… you are not a female. Most females get this type while they are pregnant....

Words: 435 - Pages: 2

Premium Essay

Unit 1 Assignment 1

...Unit 1 Assignment 1 Exploring Programming Languages PT1420 Introduction to Programming Pong Sintaisong ITT-Tech Tempe Campus Instructor: Ms. Kate Eskesen 9/23/2015 5 Programming Languages 1970s-2000 1970s Pascal: Niklaus Wirth was is the invertor and was invented in 1971 Motivation: To provide features that were lacking in other languages at the time. Forth: Forth was created in 1970 by Charles H. Moore Motivation: He wanted to create a language that would allow direct user and machine interactions. C: In 1971-73 Dennis M. Ritchie turned the B language into the C language. Motivation: Lack of features from B language so made C language. Prolog: Alain Colmerauer in 1973. Motivation: Unknown ML: In 1973 ML was invented as part of the University of Edinburgh's LCF project Motivation: Research in constructing automated theorem provers. Eventually saw that the "Meta Language" they used for proving theorems was more generally useful as a programming language. 1980s C++: Bjarne Stroustrup was the inventor. 1979 Motivation: He needed the use of a programming language that was concise and that produced compact and speedy programs. MATLAB: First Fortran MATLAB was portable and could be compiled to run on many of the computers that were available in the late 1970s and early 1980s. Cleve Moler is the inventor. Motivation: This document for engineers developing models and generating code for embedded systems using Model-Based Design with MathWorks......

Words: 715 - Pages: 3

Free Essay

Unit 1 Excercise 1

... Lab 1.1 review 1.Convert the decimal value 127 to binary. Explain the process of conversion that you used. 64 32 16 8 4 2 1 1 1 1 1 1 1 1 127-64= 63-32=31-16=15-8=7-4=3-2=1-1=0 127=1111111 2. Explain why the values 102 and 00102 are equivalent. The values are equivalent because it’s de same numerical meaning. Everything else after the one is a zero and there is no need to show the zero. 3. Based on the breakdown of the decimal and binary systems in this lab, describe the available digit values and the first four digits of a base 5 numbering system. You can use the binary system as a reference, where the available digit values are 0 and 1 and the first four digits are 1, 2, 4, and 8. In base 5, we use only 5 digits 0, 1, 2, 3 , and 4. The first four digits would be 1, 5, 25, and 125 4-Using the Internet and the Help files in Excel, explain why creating a converter from decimal to binary would be more difficult to construct. Hint: you should consider the conditional evalua- tion of whether the decimal value remaining is larger than the binary digit value. There are many converters already build into to excel itself. =DEC2BIN (9, 4) is a decimal to binary converter for the number 9 and it will show 4 places. If you leave the 4 out of the parentheses and it will only give you the places necessary to give you the number LAB 1.2) review 1. Determine the result of 100100002 + 11011102. Show......

Words: 1606 - Pages: 7

Premium Essay

Est 1 Task 1

...EST-1 Task 1 Many people believe that businesses are obligated to have an ethical duty to be socially responsible, in order to work towards increasing its positive effects on society while decreasing its negative effects. Many organizations or companies seek opportunities to be socially responsible while also making a profit for its shareholders. Company Q, a local grocery store chain recently closed two stores in high crime rate areas of the city because they constantly lost money. After years of requests and demands from customers, all of Company Q’s stores have now offers a limited amount of healthy and organic products, all of which are high profit items. It was suggested to Company Q by the area’s local food bank to donate day old food and goods and the board of directors declined. Company Q’s choice to throw away excess food rather than donate in fear of employee theft can be considered socially irresponsible. According to the USDA (2014), more food reaches landfills and incinerators than other materials in our everyday trash, making up twenty one percent of discarded municipal solid waste. According to Coleman-Jensen (2014), One in six people in America are facing hunger and forty nine million Americans are struggling to put food on the table daily. To know this information and still prefer to throw away goods is not only wasteful but socially irresponsible. Let’s examine what Company Q can do to amend their attitude toward being socially responsible. ......

Words: 762 - Pages: 4